Continental Conti EcoPlus HS3+ Steer Tire
Quick Facts
- Manufacturer: Continental Tire
- Product Name: Conti EcoPlus HS3+
- Product Type: Commercial truck radial tire
- Primary Position: Steer axle
- Service Category: Long-haul highway service
- Tire Construction: Radial
- Available Load Ranges: G and H, depending on size
- Published Tread Depth: 19/32 inch for listed North American sizes
- Published Maximum Speed: 75 mph for listed North American sizes
- Retreadable: Yes, when the casing passes inspection
- SmartWay Status: SmartWay verified
- Primary Applications: Long-haul tractors, highway trucks, and fleet vehicles operating primarily on paved roads
- Production Status: Current product; availability varies by size and distributor

Overview
The Continental Conti EcoPlus HS3+ is a commercial truck steer tire developed for long-haul highway fleets seeking fuel efficiency, dependable handling, and extended removal mileage. It is intended primarily for steer-axle service on tractors and trucks operating at sustained highway speeds with significant annual mileage.
Continental uses an advanced cap-and-base tread compound, a pressure-distributing tread profile, full-depth siping, and a reinforced decoupler rib to balance rolling resistance, wet-road performance, and resistance to irregular shoulder wear. The tire is built on Continental’s Conti 3G casing platform to support casing durability and future retreading when the casing remains serviceable.
The manufacturer reports a 27-percent improvement in removal mileage and a 10-percent improvement in decoupler durability compared with the preceding design. Actual fleet mileage depends on inflation pressure, axle alignment, vehicle loading, route conditions, maintenance practices, and driver operation.

Key Characteristics
- Designed for long-haul steer-axle service
- SmartWay-verified tire
- Advanced cap-and-base tread compound
- Full-depth siping for water displacement and wet-road performance
- Pressure-distributing tread profile intended to promote even wear
- Durable decoupler rib designed to resist irregular shoulder wear
- Cut- and tear-resistant tread compound
- 19/32-inch published original tread depth
- Conti 3G casing designed to support retreadability
- Available in common 22.5-inch and 24.5-inch commercial-truck sizes
- Standard and intelligent product configurations available in listed sizes
Major Components
- Cap tread compound
- Base tread compound
- Five-rib highway tread pattern
- Continuous center ribs
- Full-depth tread sipes
- Circumferential grooves
- Shoulder ribs
- Decoupler groove and rib
- Steel belt package
- Radial casing
- Sidewalls
- Bead bundles
- Inner liner
- Conti 3G casing structure
Product Type and Construction
The Conti EcoPlus HS3+ is a radial, tubeless commercial truck tire developed primarily for steer-axle use. Its internal casing, belt package, tread compounds, and rib-pattern design work together to carry the vehicle load, maintain directional stability, control heat, and provide a consistent contact patch.
The cap compound forms the road-contacting surface and is engineered for mileage, wet grip, and resistance to cutting and tearing. The underlying base compound helps control heat generation and rolling resistance. Steel belts stabilize the tread area, while the casing transfers vehicle loads between the tread and wheel.
How the Tire Works
The tire supports the front of the truck through compressed air contained within the tire and wheel assembly. Its tread maintains contact with the pavement while the casing flexes as the tire rolls through the contact patch.
The circumferential ribs help provide directional stability, while the grooves evacuate water from beneath the tread. Full-depth siping creates additional biting edges and water channels throughout much of the tire’s usable tread life.
The decoupler rib separates the outer shoulder region from the main tread pattern. This permits controlled movement in an area exposed to cornering forces and can reduce the concentration of stress that contributes to irregular shoulder wear.
Position and Function Within the Vehicle
The Conti EcoPlus HS3+ is intended primarily for the steer axle. Steer tires influence steering response, directional stability, braking performance, ride quality, and the driver’s ability to maintain precise control of the vehicle.
Because the steer axle responds directly to steering input, tire condition and inflation differences can be especially noticeable. Both tires should be matched for size, construction, load capability, inflation requirements, and general condition.
Common Specifications
- 11R22.5 Load Range G: 19/32-inch tread depth, 41.8-inch published overall diameter, approved for 8.25- and 7.50-inch rims, and rated for a maximum single load of 6,175 pounds at 105 psi.
- 11R22.5 Load Range H: 19/32-inch tread depth and a maximum published single load of 6,610 pounds at 120 psi.
- 295/75R22.5 Load Range G: 19/32-inch tread depth, 39.9-inch published overall diameter, approved for 8.25- and 9.00-inch rims, and rated for a maximum single load of 6,175 pounds at 110 psi.
- 295/75R22.5 Load Range H: 19/32-inch tread depth and a maximum published single load of 7,160 pounds at 123 psi.
- 11R24.5 Load Range H: 19/32-inch tread depth and a maximum published single load of 7,160 pounds at 120 psi.
- 285/75R24.5 Load Range H: 19/32-inch tread depth and a maximum published single load of 6,780 pounds at 120 psi.
- Published Maximum Speed: 75 mph for the listed North American sizes.
Specifications can change, and not every size is appropriate for every vehicle. Verify the current Continental data book, tire sidewall, wheel rating, axle rating, and vehicle manufacturer requirements before installation.

Size, Load Range, and Operating Capacity
The correct tire size and load range depend on the steer-axle rating, actual scale weight, wheel capacity, inflation pressure, operating speed, and vehicle manufacturer requirements. Available HS3+ configurations include common 11R22.5, 295/75R22.5, 11R24.5, and 285/75R24.5 sizes.
A higher load range does not automatically increase the legal or certified capacity of the vehicle. The axle, wheels, hubs, steering components, suspension, brakes, and complete vehicle certification must support the intended load.
Intended Axle Position and Service
The Conti EcoPlus HS3+ is recommended for long-haul steer service. Typical operation includes extended travel on paved highways, sustained road speeds, high annual mileage, and vehicles carrying normal legal highway loads.
Although a steer tire may sometimes be approved for other wheel positions, fleets should follow Continental’s application guidance. Drive and trailer positions can expose the tire to different traction, torque, scrub, and wear conditions than those for which its tread pattern was primarily developed.
Tread Design and Traction Features
The rib-style tread pattern is designed to maintain stable highway tracking while distributing contact pressure across the footprint. Smaller groove widths allow more tread material within the contact area, supporting wear resistance without eliminating the channels needed for water evacuation.
Full-depth siping improves water displacement and maintains additional biting edges as the tread wears. The decoupler design helps isolate the outer shoulder from forces that can produce shoulder step wear, river wear, and other irregular patterns.
Casing and Sidewall Construction
The tire uses Continental’s Conti 3G casing platform. The casing provides the structural foundation for the tread and is designed to support durability, heat management, and future retreading.
The sidewalls flex continuously during operation and should be protected from curbs, debris, underinflation, petroleum products, and excessive heat. Any exposed cords, bulges, deep cuts, impact damage, or signs of separation require immediate professional inspection.
Inflation Pressure and Load Management
Inflation pressure should be established from actual axle weights, tire size, load range, speed, and the applicable Continental load-and-inflation table. The maximum pressure printed on the sidewall is not automatically the correct operating pressure for every truck.
Underinflation increases casing flex, heat generation, rolling resistance, shoulder wear, and the possibility of tire failure. Overinflation can reduce ride quality, increase sensitivity to road impacts, and concentrate wear toward the center of the tread.
Pressure should be checked when tires are cold with a calibrated gauge. Fleets should investigate repeated pressure loss instead of continually adding air without locating the cause.
Rolling Resistance and Fuel-Efficiency Design
The Conti EcoPlus HS3+ uses cap-and-base compounds intended to balance tread wear and rolling resistance. The base compound helps manage heat and energy loss as the tire repeatedly deforms while rolling.
Fuel savings depend on the entire vehicle and operation. Tire pressure, alignment, speed, aerodynamic drag, vehicle loading, route, weather, wheel-end condition, and the tires installed on the drive and trailer axles all affect real-world fuel consumption.
Weather and Road-Surface Performance
The tread grooves and full-depth sipes are designed to help move water away from the contact patch and provide dependable wet-road performance. Drivers must still reduce speed and increase following distance during rain, standing water, snow, ice, and other low-traction conditions.
The HS3+ is primarily a paved-road, long-haul tire. Frequent operation on sharp rock, demolition debris, unimproved roads, severe construction sites, or other highly abrasive surfaces may justify a vocational or severe-service tire with greater resistance to impact and cutting.
Mounting and Installation
Commercial truck tires should be mounted only by trained personnel using approved equipment and procedures. The tire size, load range, rim diameter, rim width, wheel condition, valve hardware, and inflation system must be compatible.
Before installation, inspect the wheel for cracks, corrosion, distortion, damaged bolt holes, worn mounting surfaces, and an incorrect or damaged valve. The tire should also be examined for shipping damage, bead damage, contamination, or an incorrect specification.
After installation, wheel fasteners must be tightened according to the wheel and vehicle manufacturers’ procedures. Steer assemblies should be balanced when required, and fastener torque should be rechecked according to fleet policy.
Vehicle and Operating Compatibility
Compatibility depends on the truck manufacturer, model, model year, steer-axle rating, wheel size, wheel width, wheel offset, suspension, steering geometry, brake clearance, fender clearance, and intended operating load.
The installed size should match the vehicle certification label or an approved replacement specification. Changing tire diameter can affect ride height, speedometer accuracy, electronic safety systems, turning clearance, and the relationship between the tractor and trailer.
Tire and Wheel Compatibility
The wheel must have the correct rim diameter, approved rim width, load rating, pressure rating, mounting system, and offset for the selected tire and vehicle. Both aluminum and steel commercial-truck wheels may be suitable when their specifications meet the application requirements.
The tire, wheel, valve stem, extension hardware, pressure sensor, and balancing components should be treated as one assembly. A tire with sufficient load capacity must not be installed on a wheel with a lower load or pressure rating.
Common Applications
- Long-haul sleeper tractors
- Long-haul day-cab tractors
- Interstate freight operations
- Truckload fleets
- Less-than-truckload linehaul fleets
- Dry-van operations
- Refrigerated freight operations
- Tanker fleets operating primarily on highways
- High-mileage regional and national fleets
- Owner-operator highway tractors
Advantages
- Developed specifically for fuel-efficient long-haul steer service
- SmartWay-verified design
- Published improvement in removal mileage over its predecessor
- Improved decoupler durability
- Full-depth siping supports wet-road performance
- Tread profile promotes even footprint pressure
- Cap-and-base compounds balance mileage and rolling resistance
- Improved cut- and tear-resistant tread compound
- Conti 3G casing supports retreading opportunities
- Available in several common fleet sizes and load ranges
Limitations or Considerations
- Primarily intended for paved-road long-haul service
- Not designed as a dedicated severe-service or off-road tire
- Fuel-economy benefits depend on proper pressure and vehicle maintenance
- Steer-axle irregular wear can develop when alignment or steering components are incorrect
- Actual removal mileage varies by fleet and operating conditions
- Not every size or load range fits every truck or wheel
- Retreadability depends on casing condition and inspection results
- Purchase price may be higher than that of some general-service tires
- Availability can vary by size, region, and distributor inventory
Driver and Operator Experience
A properly maintained set of Conti EcoPlus HS3+ tires should provide predictable steering response and stable highway tracking. Drivers may notice changes in steering feel when pressure is incorrect, tires are unevenly worn, or the steer axle is misaligned.
Drivers should report vibration, pulling, shimmy, repeated pressure loss, unusual road noise, visible damage, or rapid tread-wear changes. Early reporting can protect the tire casing and help prevent a road-service event.
Inspection and Wear Points
- Tread depth across each major groove
- Inside and outside shoulder wear
- River wear along rib edges
- Heel-and-toe or feathered wear
- Center-rib wear
- Flat spotting
- Cuts, punctures, and embedded objects
- Sidewall cracking, abrasion, bulges, or exposed cords
- Bead-area damage
- Valve stems, valve cores, and caps
- Wheel cracks, corrosion, and damaged fastener holes
- Evidence of rubbing against steering or body components
- Signs of overheating or underinflated operation
Tire Rotation and Position Management
Steer-tire rotation practices depend on fleet policy, tire condition, tread-wear pattern, vehicle alignment, and applicable regulations. Moving tires between positions should only be performed when the tire’s size, load capacity, condition, and design are approved for the new position.
Rotation should not be used to conceal an unresolved mechanical problem. Alignment, worn suspension components, incorrect bearing adjustment, wheel runout, and pressure differences should be corrected before tires are repositioned.
Balancing, Alignment, and Runout
Wheel balance, tire uniformity, radial runout, lateral runout, axle alignment, and steering geometry can affect ride quality and tread life. A vibration should be diagnosed rather than automatically attributed to the tire.
Toe, caster, camber, thrust angle, wheel-bearing condition, steering linkage, suspension bushings, shock absorbers, and wheel centering can all influence steer-tire wear. Final alignment measurements should be taken at the correct vehicle ride height and normal operating condition.
Retreadability and Casing Life
The Conti EcoPlus HS3+ uses Continental’s Conti 3G casing and is designed with retreadability in mind. A sound casing can provide additional service through an approved retread process after the original tread has been removed from service.
Retread eligibility is never guaranteed. The casing must be inspected for impact damage, excessive heat exposure, fatigue, moisture intrusion, improper repairs, bead damage, separations, and other conditions that could make it unsuitable for continued use.
Maintenance and Ownership Notes
Consistent inflation management is one of the most important factors affecting steer-tire performance. Pressure should be checked regularly with a calibrated gauge and compared with the value established from actual load and manufacturer data.
Fleets should record tire position, installation mileage, tread depth, pressure history, repairs, rotations, removal mileage, and casing disposition. These records make it easier to compare cost per mile and identify recurring vehicle-related wear.
Wheel alignment should be checked when irregular wear appears, steering or suspension components are replaced, the truck is involved in a collision, or the driver reports pulling or unstable tracking.
Common Tire Problems
- Irregular shoulder wear: Incorrect toe, worn steering components, pressure problems, aggressive cornering, or excessive side forces may produce uneven shoulder wear.
- River wear: Narrow wear channels near rib edges can develop from free-rolling steer service, alignment conditions, tread design, or prolonged highway operation.
- Center wear: Excessive pressure, a mismatched wheel, or operating conditions that concentrate contact near the tread center may accelerate wear.
- Both-shoulder wear: Underinflation, overloading, or repeated low-pressure operation may increase wear on both shoulders.
- Cupping or scalloping: Worn shocks, wheel imbalance, bearing looseness, runout, or suspension problems can create alternating high and low tread areas.
- Steering pull: Pressure differences, conicity, alignment, brake drag, suspension damage, or mismatched tires may cause the truck to pull to one side.
- Vibration: Imbalance, improper wheel centering, runout, flat spotting, damaged wheels, or mechanical looseness may produce steering-wheel vibration.
- Repeated air loss: Punctures, valve leakage, rim corrosion, bead damage, cracked wheels, or improper repairs may cause continuing pressure loss.

Safety and Service Precautions
Commercial tire and wheel assemblies store substantial energy. Mounting, demounting, inflation, repair, and inspection should be performed by trained personnel using approved equipment, inflation restraints, and procedures.
Never exceed the tire, wheel, valve, or vehicle manufacturer’s limits. A tire that has been driven while severely underinflated may contain hidden structural damage and should be removed for professional inspection before reinflation or return to service.
Tires with exposed cords, sidewall bulges, tread separation, severe impact damage, or incompatible repairs should not remain in service. Federal, state, provincial, fleet, and manufacturer requirements should govern inspection and removal decisions.
Identification Information
Identification information is molded into the tire sidewall. Record the complete designation before ordering replacements or comparing specifications.
- Manufacturer name
- Conti EcoPlus HS3+ product name
- Tire size
- Load range
- Service description
- Maximum load and inflation markings
- DOT tire identification number
- Production date code
- Radial and tubeless markings
- Manufacturing country
- Continental article number when available
- Standard or intelligent product configuration
Buying Considerations
- Confirm the original vehicle tire size
- Verify the steer-axle rating and actual scale weight
- Select the correct load range
- Check the wheel diameter, width, pressure rating, and load rating
- Confirm fender, suspension, steering, and brake clearance
- Compare expected mileage with the intended route
- Consider fuel efficiency and total cost per mile
- Review casing-credit and retread programs
- Check the DOT production date before installation
- Determine whether a standard or intelligent configuration is required
- Verify regional inventory and replacement availability
- Compare warranty and adjustment policies
Variants and Configurations
- 11R22.5 Load Range G
- 11R22.5 Load Range H
- 295/75R22.5 Load Range G
- 295/75R22.5 Load Range H
- 11R24.5 Load Range H
- 285/75R24.5 Load Range H
- Standard product article configurations
- Intelligent product article configurations
Size availability, article numbers, intelligent-tire options, and regional inventory can change. Buyers should verify the current Continental catalog before ordering.
Comparison to Similar Equipment
Compared with the Michelin X Line Energy Z Steer Tire, the Continental Conti EcoPlus HS3+ provides another premium long-haul steer option focused on fuel efficiency, highway mileage, and casing value.
Compared with the Bridgestone R213 Ecopia Steer Tire, the HS3+ uses Continental’s own cap-and-base compounds, tread-pressure distribution, decoupler design, and Conti 3G casing platform.
Compared with the Goodyear Fuel Max RSA Steer Tire, both products target fuel-conscious highway fleets. Final selection should consider current size availability, cost per mile, dealer support, casing programs, and fleet experience.
Compared with the Continental Conti HSL 3 Steer Tire, the HS3+ is oriented toward conventional long-haul highway service, while the HSL 3 is positioned for super-regional operation.
Best Fit For
- Long-haul fleets prioritizing fuel efficiency
- Tractors operating primarily on paved highways
- High-mileage national and regional operations
- Fleets tracking tire cost per mile
- Operators seeking a SmartWay-verified steer tire
- Fleets that preserve casings for retreading
- Vehicles using common 22.5- or 24.5-inch commercial wheel sizes
- Operations with established inflation and alignment programs
- Owner-operators seeking a premium long-haul steer tire
Related Vehicle and Trailer Types
- Complete Guide to Semi Truck Types
- Sleeper Cab Trucks
- Day Cab Trucks
- Dry Van Trailers
- Refrigerated Trailers
- Tank Trailers
- Flatbed Trailers
Related Truck and Trailer Models
- Freightliner Cascadia
- Kenworth T680
- Peterbilt 579
- Volvo VNL
- International LT Series
- Mack Anthem
- Western Star 57X
Related Tire Types
- Steer & All-Position Truck Tires
- Drive Tires
- Trailer Tires
- Vocational & Severe-Service Tires
- Commercial Truck Wheels
- Tire Pressure Monitoring & Inflation Systems
Related Tire and Wheel Products
- Michelin X Line Energy Z Steer Tire
- Bridgestone R213 Ecopia Steer Tire
- Goodyear Fuel Max RSA Steer Tire
- Continental Conti HSL 3 Steer Tire
- Continental HDL2 Eco Plus Drive Tire
- Continental Conti EcoPlus HT3 Trailer Tire
- Continental ContiConnect Live Tire-Monitoring System
- Alcoa Ultra ONE Aluminum Wheel
Related Equipment Systems
- Tires & Wheels
- Suspension Systems
- Axles & Differentials
- Brake Systems
- Electrical Systems
- Telematics & ELD Systems
- Safety Systems
- Equipment Systems
Related Guides
- Tire & Wheel Guides
- Commercial Truck Tire Types Explained
- Steer vs Drive vs Trailer Tires
- How to Read Commercial Truck Tire Sizes and Ratings
- How to Inspect and Maintain Commercial Truck Tires
- Aluminum vs Steel Commercial Truck Wheels
Regulatory and Compliance Notes
Commercial tires must comply with applicable federal, state, provincial, and local requirements governing load capacity, inflation, tread depth, condition, repairs, and vehicle operation.
Steer-axle tires are subject to particularly important inspection and tread-depth requirements. Operators should follow the rules that apply in their jurisdiction and should not rely solely on a general wear-bar inspection.
The tire’s rated capacity does not increase the vehicle’s certified axle or gross vehicle weight rating. The vehicle remains limited by its lowest-rated tire, wheel, axle, suspension, brake, frame, or other applicable component.
Real World Operating Notes
Long-haul steer-tire results are heavily influenced by alignment and inflation discipline. A premium fuel-efficient tire can still experience short life if the steer axle has incorrect toe, worn components, uncorrected runout, or repeated low-pressure operation.
Removal mileage should be evaluated together with fuel consumption, casing value, irregular-wear rate, road-service incidents, and retread acceptance. The tire with the highest initial mileage is not always the tire with the lowest total operating cost.
When replacing only one steer tire, fleets should consider tread-depth difference, diameter, casing construction, load range, and handling consistency. Many operations replace steer tires as a matched pair to preserve predictable steering behavior.
Frequently Asked Questions
What is the Continental Conti EcoPlus HS3+?
It is a fuel-efficient commercial truck radial tire designed primarily for long-haul steer-axle service.
Is the Conti EcoPlus HS3+ SmartWay verified?
Yes. Continental identifies the Conti EcoPlus HS3+ as a SmartWay-verified tire.
What tread depth does the tire have?
Continental publishes a 19/32-inch original tread depth for the listed North American sizes.
What sizes are available?
Published North American sizes include 11R22.5, 295/75R22.5, 11R24.5, and 285/75R24.5 in application-specific load ranges.
Can the HS3+ be retreaded?
Yes, when the Conti 3G casing passes a professional inspection and remains suitable for retreading.
Can the tire be used on a drive or trailer axle?
The HS3+ is recommended primarily for long-haul steer service. Any alternate-position use should follow Continental’s application guidance and the vehicle’s requirements.
What causes irregular wear on this steer tire?
Common causes include incorrect inflation, improper toe or camber, worn steering or suspension components, wheel imbalance, runout, bearing looseness, and operating conditions that create repeated shoulder stress.
Does the HS3+ improve fuel economy?
It is designed for reduced rolling resistance and is SmartWay verified. Actual fuel savings depend on the complete vehicle, operating route, speed, loading, pressure maintenance, and tires used at every axle position.
What is an intelligent HS3+ tire?
Continental lists standard and intelligent article configurations for several HS3+ sizes. Buyers should confirm the sensor equipment, monitoring compatibility, and installation requirements for the exact intelligent article number.
How should the correct replacement tire be identified?
Use the complete sidewall size, load range, service description, wheel specification, axle rating, Continental article number, and vehicle manufacturer requirements.
Availability and Where to Find
The Continental Conti EcoPlus HS3+ may be available through Continental commercial-tire dealers, fleet-tire suppliers, truck dealers, truck-service centers, and heavy-duty tire distributors.
Availability depends on tire size, load range, standard or intelligent configuration, production schedules, and regional inventory. Buyers should confirm the tire’s complete article number and production date before purchase.
Current product information and dealer resources are available through the Continental Conti EcoPlus HS3+ product page.
Support Trucking Families
Truck Equipment Atlas supports the mission of Grey Cross, a nonprofit dedicated to helping families of truck drivers who lose their lives while on the road. As the site grows, part of its mission is to bring awareness and support to these families.
Podcast or Video Section
Learn More Through Audio and Video
Truck Equipment Atlas will continue expanding with podcast episodes, interviews, and equipment breakdowns to help drivers and fleets better understand trucks and equipment.
Follow the Growth of Truck Equipment Atlas
Truck Equipment Atlas continues to expand with new truck profiles, trailer coverage, diesel engine pages, equipment system resources, manufacturer information, and educational guides.
Visit our Site Updates page to explore recent additions, project milestones, and upcoming resources as we continue building one of the industry’s growing commercial trucking equipment reference libraries.
View the Latest Site Updates: Truck Equipment Atlas Site Updates
